Brick designers have many options when selecting and establishing cladding systems for luxury industrial and institutional buildings. As with many other scopes, there are lots of factors that influence and finally determine the design design and specification, including, amongst others: funding, building height, structural support, climate zone, functionality, sustainability, code compliance, aesthetics, lead time, etc..

Institutional buildings frequently have less rigorous budgeting constraints than other kinds of construction projects. At precisely the exact same time, museum, college, hospital, religious, and other institutional projects are often designed with longer life spans than other project types. As mentioned previously, many things impact the decision-making process. Below is a quick overview of a number of these variables.

honeycombing concrete : As with many different parameters, cost of materials and labour to supply and install Cartoon systems can vary significantly from region to region. For this article we reference anecdotal information on such prices to a general contractor in Texas cities. For jobs using cladding budgets (supply & install) at the $30's to $50 per sf, a restricted assortment of lower cost products such as EIFS, stucco, single skin metal, Tilt-Up, and poured-in-place concrete can fit the bill.

Building height & structural support: Single story along with other low-rise structures could be economically clad with mild weight or with heavy hedging methods, as heavy stone or masonry walls could be simply stacked, transferring dead load to bases & cement slab. On the other hand, multi-story buildings need to include a more robust framing system if hefty cladding systems are being considered. Honeycomb-backed cladding systems normally weigh approximately 6 lbs. /sf. And having a high flexural strength, setup for many projects will only need 16-gauge metal studs at 16" on-center. This may result in important savings in structural framing price when compared with dimension stone, which may weigh 40+ lbs/sf.

Climate zone & performance: Different regions around the country have different climate patterns and therefore, different thermal insulation requirements. Furthermore, several cities, states and counties have adopted green or sustainable building codes, a few of including constant insulation (ci) requirements. While stone on honeycomb cladding systems do not have a significant thermal insulation value, they can be designed together with a large array of insulation methods, including commercially available continuous insulation solutions that fulfill the most rigorous thermal efficiency code requirements.

Sustainability: lots of institutional buildings have been designed to meet LEED certificate or alternative sustainable design & construction criteria. This is a complex subject that cannot be addressed briefly and frequently involves specialized consultants for any specific job.

Code compliance (fire spread): Code compliance to satisfy NFPA 285 is needed for certain projects and might also be needed on jobs with no requirement. Testing should be conducted after NFPA 285, Standard Fire Test Method for Evaluation of Fire Propagation Characteristics of Exterior Non-Load Bearing Wall Assemblies Containing Combustible Components, 2012. Some lightweight rock cladding systems and a number of other alternative cladding systems have fulfilled the necessary requirements for acceptance of this important evaluation.

Latest comments

No comments